PRODUCT MANUAL
16GB Pathfinder IR Watch : SB-WR9800
Page 7
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
RECORDING VIDEO
• VIDEO START: After turning unit on, while in standby mode, quickly press and release
the video button. The red indicator light will blink once and go off. Your unit is now
recording video.
• VIDEO STOP: To stop video recording, press same VIDEO button once, and release.
Indicator light will return to a steady red.
Status Light
Camera
(see notes!)
NOTE: when facing you, as shown above, the camera will record UPSIDE-DOWN.
Turn
your wrist to face the camera towards your subject. The camera should be located at the top
when your wrist is turned. This position will record the image properly.
NOTE:
It is always recommended to do a few test videos to get properly accustomed to the
device before using it in any real or serious situation!
POWER/VIDEO
Button
TURN ON: To turn on watch, press and release the POWER button. Red indicator light comes
on and remain steady.
TURN OFF: To turn unit off at any point, hold the POWER button for atleast 3 seconds and
release. Indicator light will blink and go off.
