POWER ON
1. Hold the A button until the Green status light appears. Wait for the status light to turn Red.
You are now in Stand By / Video Mode.
RECORD VIDEO
1. The Red status light is Video Mode.
2. Press A to start recording video. The status light will blink red a few times, then go dark. It is
still recording video.
3. To check the status of your watch, press the A button. It will blink Red a few times to show it
is still recording.
4. To stop recording, press A to show status, the blinking red lights. Press A again and
recording will stop.
AUDIO ONLY
1. From Stand By mode, press the B button to switch Modes.
2. Press the B button once and the status light will turn blue. This is Audio Mode.
3. Press A to start recording in Audio mode. The blue status light will blink a few times, then
go dark. It is still recording.
4. To check the status of your watch, press the A button. It will blink Blue a few times to show
it is still recording audio.
5. To stop recording, press the A button to show status. Press A again and your recording will
stop.
PHOTOS
1. From Stand By Mode, press the B button to switch Modes.
2. Press the B button until the status light is Green. This is photo mode.
3. Aim the camera, and press the A button to take a photo. The status light will blink. Then
you’re ready for your next photo.
POWER OFF
1. Hold the A button until the status light goes dark.
