Replace seat pad by
reversing order:
Put pad on headrest and
replace harness guides.
Make sure harness
guide’s tab goes over
metal bar.
Starting from bottom of
child restraint, slip pad on
shell; tuck in pad around
harness adjuster and
over upper belt guides.
Make sure pad is under
headrest and replace
lower harness guides.
Replace the headrest pad
by starting from the top.
Rethread harness (see
belt-positioning booster
section).
From the back, use a
screwdriver to press in
on lip of harness guide
and pop guides through
the front. Pull cover off
headrest.
Hand wash with warm
sudsy water, rinse clean
and air dry. Do not use
bleach or other harsh cleaners. Do not dry clean.
Spot clean harness straps. Do not machine wash.
52
53
6
Depending on your model,
to remove the headrest
pad, pull pad off of the
headrest tab located by
the harness/headrest
adjuster, then pull pad off
of headrest.
6A
Remove harness guides in
bottom of seat.
From the back of the seat,
locate the lower harness
guides that are between
the bottom of the seat and
base. Remove both lower
harness guides
in bottom
of seat.
Push harness guide lip
toward outside of shell
with one hand while
pulling harness guide from
the front with the other.
3
Adjust backrest to lowest
position. Work pad off
shoulder belt positioning
guides and off of headrest.
Pull pad out from under
buckle cover and work it
off the shell.
4
5
Lower Harness Guides
4358-6547 US All in One.indd 55-56
4358-6547 US All in One.indd 55-56
1/20/14 3:19 PM
1/20/14 3:19 PM
