Ref: Crimping_Tool_18v_Handbook
Page 11 of 16
Doc ID: MKT-567 Version: 2.0
CRIMPING TOOL - 18V BATTERY & CHARGER SET
MANUAL/INSTRUCTION OF BATTERY
SPECIFICATION
Voltage
9.6V
14.4V
18V
CURRENT
CHARGING
Ni-MH
B-03
B-02
-
3.0Ah
90 MIN.
LI-ION
-
B-05
B-04
3.0Ah
60 MIN.
-
-
B-06
1.5Ah
30 MIN.
BEFORE OPERATION PLEASE NOTE
◆
Do not contact the battery terminals with any metal. Otherwise the battery may short circuit.
◆
Do not store the battery in wet/hot spaces. Store battery in a dry clean space.
◆
The electrical capacity of the battery may be reduced/lost/damaged if the battery is left in the tool
or charger for a long period.
◆
Do not heat the battery.
◆
Keep the battery away from water, keep the battery dry & clean.
◆
Do not press/take apart/throw down the battery. Do not put the battery near water or fire. Do not
put the battery in your pocket.
◆
Do not damage/destroy the housing/package/body of battery.
◆
Do not use damaged batteries with strange/abnormal appearances.
◆
The battery after use will be warm.
◆
The battery in low temperatures (10 Degree or below), will be deteriorated and its use time will be
shorter. This is normal.
◆
Please follow the instructions of battery manual to charge the battery.
◆
Do not charge the battery directly under the sun or in a space with high temperature.
◆
Please use supplied charger to charge the battery.
◆
Do not use battery with other brands.
◆
Please charge the battery before storage if you will not use the battery for a long time. Please charge
the battery at least once a month to ensure its life.
HOW TO CLEAN THE BATTERY
◆
If the connecting points (+/-) or the cap of battery is dirty. It may obstruct the electrical current.
Therefore,
you will find the digital monitor will still show “Without Power” under full charged.
◆
Please keep the connecting points (+/-) or the cap of battery clean. Use a dry soft cloth to wipe the
battery housing/cap and the connecting points (+/-).
◆
Do not use cleaners or chemical cleaners to clean the battery or charger, otherwise damage may
result.
RECYCLE & THROW AWAY
◆
Make sure there is without any power inside the battery before throwing the battery away.
◆
Please charge the battery fully at
the first use. If the battery’s
life is reduced after several uses, you
will require a replacement battery.
◆
Please stick gummed tape on the connecting points (+/-) for fire/explosion prevention. Please
follow the local rule of recycling.
