safetyplatforms.co.uk | 01924 420820 | info@safetyplatforms.co.uk
INSTALLATION
To install the guardrails, hold them at the mid point whilst standing half way up the stairs. Partially
insert the lower vertical post in to the socket fi xed near the base of the stairs. Then position the upper
vertical post in to the socket at the upper end of the stairs.
Repeat this process for guardrails to the opposite side of the stairs.
When guardrails to both sides are positioned tighten the screw fi xing to all four sockets to tighten the
guardrail frames.
5. Inspection
Prior to use stand back and look at the equipment, ensure it is property erected, Is stable and suit-
able for the task.
6. Edge protection
To comply with the work at Height Regulations and to prevent a risk of falls, ensure the fl oor edges of
upper fl oors are suitably guardrailed ;
7. Weekly Inspection
Inspect the stair unit on a weekly basis to ensure the fi xings are secure and for any signs of damage.
Should there be any issues with fi xings or damage, immediately prevent anyone from using the stairs
until the fi xings are replaced or damage repaired.
8. Removal
Dismantle the stair unit in the reverse order of the installation and store in a safe and secure manner
to prevent trips or theft.
See Items 1 & 3
See Item 4
See Item 2
2437mm
2650mm
to
3050mm
