Installation Guide
continued on next page…
Plug 3G/4G Dongle into DC5V (1)
Socket.
Plug the Power Cable into DC5V (2)
Socket.
Wire Schematic:
Yellow: Power
Blue: Ignition Signal
Black: Ground
Step 1: Hardwire to vehicle according
to schematic above. (extend wire if
needed)
Step 2: Use electrical tape to conceal
exposed wires once connected. Test
Ignition to insure proper connection.
Step 3: Conceal Charge Guard/Battery
Backup box and wires.
Step 4: Plug in Longer Black Cable to
Camera.
When the power is successfully
connected, the IVR LED will light on for
10 seconds.
