8
47 SERIES IP CAMERA
1.
Feed the camera network cable through the lock nut, waterproof rubber
gasket (the rubber gasket inset ridge must face the waterproof endcap), and
the waterproof endcap in order.
2.
Crimp an RJ-45 network plug onto the end of the cable, taking care to insert
the twisted pairs of wires in correct order.
3.
Place the O-type gasket onto the end of the camera’s network interface
socket.
4.
Insert the network plug into the camera’s network interface socket.
5.
Insert the waterproof rubber gasket into the waterproof endcap, and secure
the lock nut with the waterproof endcap.
6.
Align the snap on the waterproof endcap with the notch on the camera’s
network interface socket, and then secure the waterproof endcap to the
camera’s network interface socket to finish the installation.
Summary of Contents for 47 SERIES
Page 1: ...47 SERIES IP CAMERA USER GUIDE...
Page 16: ...13 47 SERIES IP CAMERA Dimensions...
Page 18: ...15 47 SERIES IP CAMERA Memo...
Page 19: ...16 47 SERIES IP CAMERA Memo...
