48 SERIES IP CAMERA
14
Configuration
The 48 series camera can be configured through the
Quick Configuration
Tool
software which must be accessed with a PC. The camera will need to be
configured if it is the first time the camera is used or if it has been restored to
factory default settings.
Camera Initialization
1.
Connect the PC to the NVR’s Ethernet LAN RJ-45 port with a standard
Ethernet cable.
2.
Ensure the NVR and PC are receiving power and have started up.
3.
Run
Quick Configuration Tool
.
4.
Click
IP
to modify the IP address, click
Search Setting
, and the system will
display the
Setting
dialog box.
5.
Set the device network segment, login user name and password, and
then click
OK
.
6.
Select the cameras
which need
configuration and
click
Initialization
.
The system will
display the
Device
Initialization
window
will appear.
7.
Click
Initialization
,
the system will begin
to configure the
camera.
8.
Click
OK
to complete
device configuration.
Summary of Contents for 48 Series
Page 1: ...48 SERIES IP CAMERA USER GUIDE...
Page 20: ...48 SERIES IP CAMERA 18 Appendix B Dimensions...
Page 22: ...48 SERIES IP CAMERA 20 Memo...
Page 23: ...48 SERIES IP CAMERA 21 Memo...
