IPC Setup
The IPC Setup tab allows you to configure a number of IPC
networks.
1.
Select
Enable
for the channel you would like to use.
2.
Tap the
Search
icon (magnifying glass) to search for
available IP cameras.
The IPC search screen appears.
3.
In the IPC search screen, select an available camera
and tap
OK
.
4.
Tap on the
Setup
icon for each network.
The Network Setup screen appears.
5.
Enter the following for each network:
•
Channel
•
Protocol type
•
IP address
•
Port
•
User name
•
Password
41H series cameras: leave the User name and Password fields
blank.
Gen 3 (60-32000X[Exterior] and 60-20000X [Interior]): enter
Ad-
min
in the User name field and
1234
in the Password field.
Tap the last three digits of the
Local address
to enter these
numbers manually.
After making any entries, tap
Save
at the bottom of the screen.
32
OBSERVER 4120 USER GUIDE
