Video Retrieval
The RoadRecorder 7000 NVR can be configured
to record video on the hard drive or both the
hard drive and the SD card. See the SD Card
Settings section of the Configuration chapter for
more information.
Hard Drive
Use the following procedure to remove the hard
drive.
1.
Ensure the hard drive is not being
accessed (SafeStor status indicator
displays solid green).
2.
Insert the key as shown and turn it 90
degrees to the left.
3.
Push the plunger to extend it.
4.
Push the plunger again firmly to push the
hard drive out.
5.
Grasp the hard drive and pull it straight
out.
Once removed, the hard drive can be read
with the hard drive reader connected to a PC.
The computer recognizes the hard drive as an
external storage device. For more information,
refer to the
7000 HDD Reader Quick Reference
Guide.
Use the following procedure to reinsert the hard
drive.
1.
Push the hard drive straight into the
RoadRecorder 7000 NVR firmly until it is
fully seated.
2.
Push the plunger back into its unextended
state.
3.
Turn the key 90 degrees to the right.
4.
Remove the key.
ROADRECORDER
®
7000 SERIES NVRUSER GUIDE
11
Summary of Contents for RoadRecorder 7000
