6100 W. Sam Houston Pkwy. N.
Houston, TX 77041-5113
Main: 713.896.6600 | Toll Free: 800.880.8855 | Fax: 713.896.6640
Copyright © 2017 Safety Vision, LLC All Rights Reserved.
WARNING: REMOVING MAIN THE MAIN POWER SOURCE WHILE THE NVR IS RECORDING MAY
RESULT IN CORRUPT DATA.
Be aware that removing and reconnecting power to the NVR in short periods of time (such as during some vehicle
maintenance procedures) may cause hard drive failure, leading to corrupt recorded video and other data. Safety Vision
recommends properly shutting down the NVR before removing the main power harness when cycling of the vehicle’s
power is to occur:
1. Remove the ignition source.
2. Wait for the NVR to completely power down.
The NVR may be configured to record for a period after the ignition is turned off.
3. OBSERVE THAT ALL STATUS LEDS HAVE TURNED OFF.
4. Remove the main power harness.
ROADRECORDER
®
8000 NVR QUICK INSTALLATION
