background image

ROADRECORDER® 9000 USER GUIDE

20

Appendix A: Specifications

PART NUMBER

9000-NVR

OS SUPPORT

Windows® Enterprise 

(64bit)

, Windows® 10 IOT Enterprise 

(64bit)

Windows® 10 Pro 

(64 bit)

PROCESSOR

Intel® Core™ i7 processor

MEMORY

1 × 16GB DDR4 2400 MHz SO-DIMM 

CAMERAS SUPPORTED

Up to 36 via 8 × M12 with IEEE 802.3af PoE ports   

FRAME RATE

30 fps 

(all channels, all resolutions)

IMAGE QUALITY

512 KB/s - 12 MB/s

STORAGE

2 × 2.5” SATA SSD 

(locking drive bay)

 

up to 16TB 

(2 × 8TB each)

• 

Additional storage can be added via USB External Storage Device or NAS

1 × SATA port for 3D NAND mSATA 

(2TB max)

RECORDING MODES

Continuous / scheduled / alarm

PRE-EVENT RECORDING

Configurable up to 5 minutes

POST-EVENT RECORDING

Configurable up to 10 minutes

WIRELESS MODULE

WLAN 802.11ax PCI-e NIC 2.4 / 5-6.0 GHz 

(for more standards, see “Compliance” in lower right column)

USB PORTS

4 × USB 3.0 Ports

ETHERNET

10 × Gigabit Ethernet

• 

9 x Intel i210-AT, 1 x i219 

(RJ45 supports iAMT)

 Gb/s Ethernet 

Controllers Onboard Support PXE and WOL

CANBUS/GPS MODULE 

(ACCELEROMETER  AND GPS INCLUDED)

CANbus 2.0 a/b, OBD-II, J1939 and J1708 Built-in u-blox NEO-M8 

GPS Module Untethered Dead Reckoning Technology

Sensor Integrated:

 3D Gyroscope, 3D Accelerometer

SENSORS

8 digital inputs, 4 digital outputs 

UNINTERRUPTIBLE POWER SUPPLY 

(UPS)

Internal battery backup; up to 10 minutes of post record time on 

full charge.

POWER INPUT

9 ~ 48V DC 

(ignition , OCP, OVP, surge and reversed OCP, OVP, surge and reversed 

polarity protection)

OPERATING TEMPERATURE

-4° F ~ 140° F  

(-20° C ~ 60° C)

  

[

without UPS:

 -40° F ~ 140° F 

(-40° C ~ 60° C)

]

UPS CHARGING TEMPERATURE

32° F ~ 104° F  

(0° C ~ 40° C)

STORAGE TEMPERATURE

-40° F ~ 158° F  

(-40° C ~ 70° C)

DIMENSIONS (W × H × D)

11.38 × 4.64 × 9.84 in  

(289 × 118 × 250 mm)

CERTIFICATIONS

FCC/CE Class A, E13, RoHS, EN-50155: 2007, EN-50121-3-2, EN 55011, 

EN 61000-4-2,  EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, 

EN 61000-4-6

COMPLIANCE

Shock and Vibration:

 EN61373 category 1 Class A with SSD

Vibration:

 MIL-STD-810G, Method 514.6

Shock:

 MIL-STD-810G, Method 516.6

Wi-Fi:

 802.11ax 

(a/b/g/n/ac)

• 

Including:

 

IEEE 802.11/d/e/h/i/k/r/u/v/w

Summary of Contents for RoadRecorder 9000


























Reviews: