ROADRECORDER® 9000 USER GUIDE
12
Import/Export NVR Configuration
Users can import and export configuration files from this
section. A configuration file saves all the NVR’s configuration
settings, which can then be duplicated across multiple NVRs.
•
Select Configuration File:
To import a saved configuration
file, click the Browse/Import button.
Navigate to where the appropriate file is saved and click
Open
.
Confirm the appropriate file is displayed and click
Browse/
Import
. The configuration file is uploaded automatically.
By importing a configuration file, the NVR will immediately
reboot on its own.
•
Select Destination Directory:
To save a configuration file,
confirm all configuration settings are set appropriately,
then click the
Browse/Export
button.
Navigate to the destination of your choice and click the
Select Folder
button to save the configuration file. The
configuration file is saved automatically in the selected
destination.
Username / Password Configuration
Users can update Username and Password from this section
for auto login.
Click the
Modify Credential
button. The NVR Credential
Configuration Setup window appears.
Enter a Username and Password in the appropriate fields, then
click
Save
.
Reboot
Click the
Reboot
button to immediately reboot the NVR.
Firmware Configuration
The
Firmware Configuration
page allows you to import/export configuration files, update username and password, as well as
reboot the NVR.
