www.safetyxpress.com.au
PRODUCT INFORMATION &
INSTALLATION GUIDE
1300 394 240
3
Page
of 4
Installation Manual: Automatic Parking Lock
Lock
My Parking
User Center
Unlock
My Parking
Switch Lock
Remote Control Pairing
Automatic Sensor Pairing
Remote Control B Pairing
Open KAVASS App, on right hand side top corner,
click the 3 dots, and Select > Remote Control Pairing.
Follow prompts on the next interface:
- Press both buttons on Remote Control B
simultaneously, after hearing a ‘beep’ sound, your
Automatic Parking Lock should be paired with your
Smart Phone.
You can now test the remote control functions as
follows:
Multiple User Control - APP
Owner can give access to other users - such as
visitors by following below steps
Note: if you have purchased
additonal remote control units, the
same steps would apply to pair all
additional remote countrols.
Motor
Box
Battery
Box
Buzzer
Ultrasonic
Sensor
Up
Down
Up
Down
CAR PARK
Please Install Automatic Parking Lock
in the Middle of Parking Space
PRESS
Up
Down
Remote
Control B
Motor
Box
Battery
Box
Buzzer
Ultrasonic
Sensor
Up
Down
Up
Down
CAR PARK
Please Install Automatic Parking Lock
in the Middle of Parking Space
PRESS
Motor
Box
Battery
Box
Buzzer
Ultrasonic
Sensor
Up
Down
Up
Down
CAR PARK
Please Install Automatic Parking Lock
in the Middle of Parking Space
PRESS
Press Button with Lock image
to raise the barrier bar up.
Press Button with Unlock image:
to lower the barrier bar up.
1. Click User Center (at bottom right of main screen)
2. Click My Parking
3. Pick the Parking Lock you want to give visitor access to
4. Add Authorised Person (visitor)
5. Enter visitor’s Mobile and Name
6. Click Share
7. Once sharing is successful, all users should see the same
interface (blue and white interface as shown on left)
User Center Interface
Note:
Owner has control to add/
delete visitors at any time
Max. 10 people can be
given temp. access as
visitors to the Parking Lock.
(by repeating the same
steps)
Step 1
Step 1
Step 2
Step 3
Step 4
Step 5
enter visitor’s mobile
enter visitor’s name
Visitors need to download
and install KAVASS APP on
their phone first, and both
owner and visitor need to be
within the operating range
of the Automatic Parking
Bollard.
Once successful, both owner
and visitor will see the same
blue/white interface
If unsuccessful, visitor won’t
see the blue/ white interface
at all.
