www.safetyxpress.com.au
PRODUCT INFORMATION &
INSTALLATION GUIDE
1300 049 246
Page 4 of 4
How To Remove Bollard From Base Plate
(To Allow Vehicle Access)
1. Put the key into lock barrel, gently twist it anti-clockwise. Make sure you hold the key down in place
with one hand (so it is not locked), while holding the bollard handle with another hand.
2. Twist the bollard handle anti-clockwise so the triangular cuts on base plate and bollard base match
3. Once lined up, genlty lift the bollard out of the base.
4. Store your bollard in a safe place while allowing vehicle access. eg. you can put the bollard onto another
base plate located elsewhere, OR you can purchase bollard hangers to store bollard when not in use
Surface Mount Twist Type Bollard
Note: DO NOT turn key by force the wrong direction as this may damage the lock mechanism
Removable Surface Mount - Twist Type Bollard
Step 1
Step 2
Step 3
Turn Key
ANTI-CLOCKWISE
Hold Handle
to take bollard
out
Twist Bollard ANTI-
CLOCKWISE to release
it from base place
Bollard Hanger
Make sure the triangular cut
on base plate and bollard
match, before you can
remove bollard
