Table Of Contents
Warranty
- - - - - - - - - - - - - - - - - - - - - - - - - 4
Safety Information
- - - - - - - - - - - - - - - - 5-6
-Proposition 65 Warning
- - - - - - - - - - - - - - - 6
Set Up
- - - - - - - - - - - - - - - - - - - - - - - - - 7-10
-Electrical Service Requirements - - - - - - - - - 8
-Single Phase - - - - - - - - - - - - - - - - - - - - - - - 8
-Three-phase Electrical Service (230v) - - - - - 9
-Air Service - - - - - - - - - - - - - - - - - - - - - - - - 10
-Dust Collection - - - - - - - - - - - - - - - - - - - - - 10
Introduction To The Components
- - 11-18
-Load Meter - - - - - - - - - - - - - - - - - - - - - - - 11
-Air Control - - - - - - - - - - - - - - - - - - - - - - - - 11
-Sanding Heads Start Control - - - - - - - - - - - 12
-Sanding Head Stop Control - - - - - - - - - - - - 12
-Emergency Stop Locations - - - - - - - - - - - - 13
-Conveyor Table Speed Adjustment Controls 14
-Conveyor Table Height Adjustment Gauges 15
-Gauge With Ruler And Indicator - - - - - - - - 15
-Simple Stationary Pointer - - - - - - - - - - - - - 16
-Optional Digital Positioning Gauge System - 16
-Abrasive Belt Tracking System - - - - - - - 17-18
Sanding Operations
- - - - - - - - - - - - - - 19-28
-Operational Checklist - - - - - - - - - - - - - - - - 19
-Abrasive Sanding Belt General Information - 20
-Abrasive Sanding Belt Installation - - - - - - - 21
-Operating The Machine - - - - - - - - - - - - - 22-24
-Introduction To The Platen - - - - - - - - - - - - 25
-
37” X 60” Model Platen - - - - - - - - - - - - - - - 26
-Installing and Using the Platen - - - - - - - - - - 26
-4375 Series Models Platen- - - - - - - - - - - - - 27
-Platen Removal 4375 - - - - - - - - - - - - - - - - 28
Maintenance
- - - - - - - - - - - - - - - - - - - 29-40
-Repairs - - - - - - - - - - - - - - - - - - - - - - - - - - - 29
-Lubrication - - - - - - - - - - - - - - - - - - - - - - - - 29
-Sanding Head Rollers - - - - - - - - - - - - - - - - 29
-Conveyor Table Rollers- - - - - - - - - - - - - - - - 29
-Bronze Bushings - - - - - - - - - - - - - - - - - - - - 29
-Jack Screws - - - - - - - - - - - - - - - - - - - - - - - 29
-Conveyor Drive Gear Reducer - - - - - - - - - - - 30
-Swing Arm Top Idler Roller - - - - - - - - - - - - - 30
-All Metal Moving Parts - - - - - - - - - - - - - - - - 30
-Drive Motor Belt Tension - - - - - - - - - - - - - - 30
-Platen Graphite Replacement - - - - - - - - - - - 31
-Platen Felt Replacement - - - - - - - - - - - - - - 32
-Contact Roller Resurfacing - - - - - - - - - - - - - 33
-Contact Roller Removal/Replacement - - - - - 34
-Contact Roller Reinstallation - - - - - - - - - - - - 35
-Re-leveling The Contact Roller - - - - - - - - - - 35
-Pinch Roller and Idler Roller Replacement - - 36
-Rear Idler Roller Leveling - - - - - - - - - - - - - - 37
-Level The Table - - - - - - - - - - - - - - - - - - - - 37
-Level The Conveyor Table - - - - - - - - - - - - - 38
-Wide Belt Sander Belt Tracking - - - - - - - - - - 39
Trouble Shooting
- - - - - - - - - - - - - - - - - 41-44
-Machine Will Not Start - - - - - - - - - - - - - - - - 41
-Unwanted Surface Marks - - - - - - - - - - - 41-42
-Sanding Belt Tracking - - - - - - - - - - - - - - 42-44
Exploded Views and Parts List
- - - - - - 45-60
-4375 Exploded Views and Parts - - - - - - 45-52
-3760 Exploded Views and Parts - - - - - - 53-59
Electrician Wiring Schematics
- - - - - - - 60-61
-Single Phase Wiring Schematic - - - - - - - - - -60
-Three Phase Wiring Schematic - - - - - - - - - - 61
2
