www.safetytracer.eu
3
Important safety instructions:
•
Read all safety instructions and manuals carefully before proceeding to use.
•
Save all safety instructions and manuals for future reference.
•
All warnings on the equipment and in the manuals must be followed ecause of personal
safety.
•
Never clean the Mopas BT with liquid detergents or cleaning agents from an aerosol
•
dispenser, but use a damp cloth to clean.
•
Do not connect any equipment other than the equipment recommended by SafetyTracer.
Deviating from the recommendations may lead to malfunctioning of equipment and systems.
•
Do not place the equipment without extra protection in humid environments or outdoors if it
is not explicitly stated that the device has been designed for this purpose.
•
Do not expose the equipment to extreme temperatures or humidity.
•
Do not expose the equipment to strong magnetic and electromagnetic fields.
•
Do not place the equipment on an unstable or vibrating surface.
•
Do not place heavy objects on the equipment.
•
Avoid strong shocks during transport.
•
The equipment may only be supplied with a power supply in accordance with the equipment
specification.
•
By opening or removing housing, live parts can be touched.
•
Do not attempt to maintain or repair the equipment independently. Maintenance and repair
work must be carried out by suitably trained and qualified personnel.
3. Use
Before the Mopas BT can be used, please follow the steps below.
Charging
Before the first use, the Mopas BT must be fully charged.
There are two ways to charge the Mopas BT:
Charging with micro USB cable
Insert the micro USB plug of the adapter at
the bottom into the Mopas BT. Then plug the
adapter into the socket.
Charging with home beacon
Place the Mopas BT upright on the charger
(Figure 3.1).
Battery status
The LED ring will light blue when the battery is almost empty. The Mopas BT will last for about two
more hours after the LED ring lights up blue. Within these two hours the Mopas BT needs to be
charged. The Mopas BT can be charged as described above. After about two hours, the Mopas BT
is fully charged and ready for use. If the Mopas BT has become too hot, you must reset the device
by charging it.
Figure 3.1
