background image

2

Dear parents

Congratulations on the purchase of your Child Safety Seat.

Safety, comfort and user-friendliness have at all times played an important role in 

the development of the Child Safety Seats.

This product meets the most stringent safety regulations and has passed the 

most stringent compulsary safety testing required by law.

Research shows that a high number of child restraint safety seats are installed 

incorrectly. Therefore, please take the time to read through this instruction 

manual carefully. Your child’s safety can only be guaranteed if this product is used 

according to correct installation following these instructions.

Continuous research by our development team, user tests and consumer 

reactions ensure that we are kept fully up-to-date in the field of child safety. 

Therefore, if you have any questions concerning the use of the Safeway Child 

Safety Seat, please do not hesitate to contact us.

If you have any questions, please contact your supplier.

For trade enquiries contact:

DISTRIBUTOR DETAILS :

Unimark Distributors CC

P.O. Box 912-1095

Silverton

0127

Tel : +27 12 8041793

Fax : +27 12 8041795

E-mail : info@safewaybabies.co.za

Web : www.safewaybabies.co.za

Introduction

Summary of Contents for MARLIN





















Reviews: