8
Using the ISOFIX System
ISOFIX
Optional: Locate the
ISOFIX Anchorage points
and place the ISOFIX
Sleeve Brackets over the
two points.
Press the ISOFIX
Connector’s Release
Button and slide the
connectors outwards
as far as possible.
Connect the ISOFIX
Connectors to the
anchorage points.
Ensure that they
“Click” into place.
Ensure that the Indicators
on the Release Button
turn GREEN.
CLICK
Push the car seat towards
the backrest of the
vehicle.
Ensure that the car seat
is properly secured by
moving it from side to
side. There should be
minimal movement.
To release the ISOFIX System, push the car seat towards the backrest of the
vehicle, press the Release Buttons then pull the Connectors from the
anchorage points.