INSTALLATION AND USAGE EXAMPLES
IF ANY OF THESE CONDITIONS EXIST
LANYARD MUST BE REMOVED FROM SERVICE
•
ToolCuff Tool Lanyards shall be inspected prior to each use
by the user and at least annually by a Competent Person. Annual
inspections shall be documented. Severity of conditions during use
may neccesitate increased frequency of documented inspections.
• Lanyards that fail inspection MUST be removed from service and
destroyed immediately.
• All components of the Lanyards shall be inspected. Hardware
inspection will include all Connectors, D-rings, and Web.
• Connectors, and D-rings should have smooth surfaces with no
indication of corrosion or damage that could negatively impact
lanyard webbing.
Lanyard Webbing, Connectors, D-rings and other components must be inspected
for:
1. Excessive Wear
8. Mold or Mildew
2. Cuts
9. Broken Stitches
3. Abrasions
10. Alterations and Additions
4. Undue Stretching
11. Rust, Oxidation, or Corrosion
5. Chemical Exposure
12. Legibility of Labeling
6. Burns or Excessive Heat
13. Deformation
7. Welding Spatter
14. Discoloration or Abraded Appearance
INSPECTION
MAINTENANCE & STORAGE
WARRANTY
ToolCuff Tool Lanyards can be cleaned with water and mild soap and hung to air dry.
Do not use chemical cleaners, harsh detergents, or solvents. Do not dry ToolCuff
products with heat.
Hardware can be wiped off with a clean, dry cloth.
ToolCuf Tool Lanyards should be stored in a cool, dry, and clean environment. Do
not store in direct sunlight or where chemical vapors could come in contact with the
harness.
SAFEWAZE™ warrants its products are free from defects in materials and construction
under normal use and service. Liability is not accepted for abuse, modification,
improper use, destructive activity and contaminated exposure.
INSPECTION LOG
Date
Inspection Items
Noted
Corrective Action
Initials
Safewaze
225 Wilshire Ave SW
Concord, NC 28025
PHONE: 800-230-0319
FAX: 704-262-9051
EMAIL: info@safewaze.com
Web: safewaze.com
FIGURE 1
FIGURE 3
FIGURE 2
Step 1
Step 1
Step 2
Step 2
Step 3
Step 3
Step 4
Step 4
Step 5
Step 5
Step 6
FIGURE 4
FIGURE 5
TAPE
TAPE
TAPE
TAPE
TAPE
Step 1
Stabilization
Tabs
Stabilization
Tabs
Step 1
Step 2
Step 2
Step 1
Step 1
Step 2
Step 2
FIGURE 7
FIGURE 11
FIGURE 12
FIGURE 13
FIGURE 14
FIGURE 6
322 Industrial Court, Concord, NC 28025
P: (704) 262-7893 or F: (704) 262-9051
WWW.SAFEWAZE.COM
SELF RETRACTING TOOL TETHER
SELF RETRACTING TOOL TETHER
ANSI / ISEA 121-2018
OSHA 1910.66 & OSHA 1926.502
SW431 and SW432 elasticated lanyards are offered in 35 lbs capacity 50” to 62” length
SW433 and SW434 elasticated lanyards are offered in 80 lbs capacity 66.5” to 80.5” length
FIGURE 8
FIGURE 9
FIGURE 10
SW411 Coil Tether
5 lbs. capacity 14” to 68” length
SW414 Coil Tether
2 lbs. capacity 28” to 74” length