MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart
™ terminal installation
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
12
2.3
Host system is a Windows™ PC
2.3.1
Installation of a MorphoSmart™ USB device (MSO3xx, MSO13x0)
The installation of a MorphoSmart™ USB device is performed in a few steps:
Install the MorphoSmart™ USB driver on the PC (please refer to MorphoSmart™ USB
driver installation section)
Connect the USB connector of the MorphoSmart™ USB device to a USB port of the PC.
Wait for USB enumeration process (usually not more than a few seconds).
Then the device is ready for use, for example: with the sample applications delivered with
MorphoSmart™ SDK (please refer to
2.3.2
Installation a MorphoSmart
™ RS232 terminal (MSO20x)
The installation of a MorphoSmart™ RS232 device is performed in a few steps :
Connect the power supply connector to the socket on top of the RS232 connector.
Connect the power supply to an outlet.
Then connect the RS232 connector to one of the RS232 port of the PC.
Then the device is ready for use, for example: with the sample applications delivered with
MorphoSmart™ SDK (please refer to
2.3.3
MorphoSmart™ SDK
The MorphoSmart™ Software Development Kit provides the required elements to enable
you to develop your own applications for MorphoSmart™ devices. It is a usually delivered
on a CDROM which contains:
all the documentation required for MorphoSmart™ devices use and integration,
the MorphoSmart™ USB driver for Windows™ PC,
sample applications which enables to demonstrate the MorphoSmart™ functions
source files of sample applications
libraries (dll) and ActiveX with MorphoSmart™ device functions
To evaluate a MorphoSmart™ device we recommend installing the MorphoSmart
Software Development Kit on a Windows™ PC:
insert the MorphoSmart™ SDK CD-ROM into the drive,
if the installation process doesn’t start automatically, double click on the Setup.exe file
to start it,
install MorphoSmart™ USB driver before connecting a MorphoSmart™ USB device,
connect the MorphoSmart™ device to a USB port, or to a RS232 port (MSO20x only),
run MSO_Login.exe or MSO_Demo.exe sample application,
select the MorphoSmart™ device to use,
try MorphoSmart™ device functions.
