DOK451 rev.2
Page 11 of 26
Figure 9: Settings for COM port
Set the "Receive (Bytes)" and Transmit (Bytes) settings to 256.
Press OK twice.
The computer may have to be restarted for the changes to take effect.
4.3
Installation of PC software
Install the PC software by running "setup.exe" found on the included memory stick or downloaded from the STIM
product support web page. Follow the on-screen instructions to complete the installation. The PC software can also be
downloaded from the
. Check this site regularly for updates.
5
Connecting the STIM210/STIM277H to your PC
Figure 10 (PCIe) and Figure 11 (USB) shows how to connect the EVK to a PC
Micro-D
P-USB
D-SUB 9
Figure 10: Connecting the STIM210/STIM277H to the computer via PCIe