FP5/GP5 User’s Manual 33
Typical Operation Example by Digital Operator (JVOP-130P)
Description Key Sequence Digital Operator Display
(1) Power ON
· Displays frequency reference value.
Operation Condition Setting
· Select LOCAL mode.
(2) Frequency Setting
· Change frequency reference value.
(3) Forward Run
· Forward run (15Hz)
(4) Frequency Reference Value Change (15~60Hz)
· Select frequency reference value display.
(5) Reverse Run
· Select reverse run.
(6) Stop
· Decelerates to stop.
LOCAL
REMOTE
ENTER
DSPL
RUN
DSPL
Change the value
by depressing
Depress 15 times
ENTER
DSPL
Change the value
by depressing
DSPL
Depress 3 times.
Switch to “rev”
by depressing
ENTER
DSPL
STOP
RESET
Depress 13 times.
REMOTE LED (SEQ, REF) OFF
RUN LED ON
RUN LED OFF STOP LED ON
0.0 Hz
Frequency Ref
15.0 Hz
Frequency Ref
15.0 Hz
Frequency Ref
0.0 Hz
Output Freq
15.0 Hz
Output Freq
15.0 Hz
Frequency Ref
60.0 Hz
Frequency Ref
60.0 Hz
Frequency Ref
60.0 Hz
Output Freq
Forward/Reverse
For
Forward/Reverse
rev
Forward/Reverse
rev
Output Freq
60.0 Hz
Output Freq
0.0 Hz
REMOTE LED (SEQ, REF) ON
REVERSE LED (REV) ON
· Write-in set value.
· Select output frequency monitor display.
· Change set value.
· Select output frequency monitor display.
· Write-in set value.
· Select output frequency monitor display.
· Write-in set value.
Chapter 2 - Operation
Trial Operation
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor
