Specialized in developing,designing and manufacturing kinds of vinyl cutter
7.After cutting
7.1.Weeding
Weeding refers to the process of removing the
parts of the media you don’ require.
We recommend using a scalpel or a spacial
weeding tool for this job,to avoid damage to
the adhesive surface.After weeding, You can
use a transfer press to transfer flock and flex
media to the textiles to be processed;apply
application tape to self-adhesive media before transferring.
7.2.Apply
Apply application tape to the weeded
material and use a roller or flat scraper to
press down firmly.To apply adhesive to the
transfer foil,remove the backing from the foil
to leave the adhesive affixed to the
application tape.You an now apply the
adhesive to the required surface.
8.Blade
Blade are extremely sensitive,extremely sharp and dangerous precision
tools.
●Always keep blade well out the reach of children.
●To avoid danger of injury,always handle blade with caution.
●Handle blade with caution and always replace the protective cap when not in
use.If the tip of the blade comes into contact with a hard material such as
following glass or stone,tiny fissures may occur at the blade tip making the
blade useless.Note the following to avoid unnecessary wear and tear the blade
and to ensure maximum working life.
●Avoid cutting the backing of loaded media.The deeper you cut into the loaded
material,the more wear and tear the blades are exposed to.
●Always set the cutting depth of the blade to cut the media precisely and
cleanly without cutting too deep.Extending the blades beyond the required
cutting depth impacts the service life of the blades without achieving better
cutting results.
●Always use the right custom blades for thicker material.
●Ragged edges on cutting the loaded media show that the blades are
blunt.Always replace blunt blades immediately.
