8
Attaching mixing and whisking tools
1. Raise the motor head by pressing the
RELEASE button.
2. Align the groove in the top of the mixing
attachment with the locking pin on the spindle
extending down from the mixer motor head.
3. Push the attachment upwards and turn
clockwise until it locks securely onto the
locking pin on the spindle. Push up and turn
anti-clockwise to remove.
4. Lower the motor head by pressing the
RELEASE button and gently lowering until it
locks into the closed position.
5. Raise the head of the mixer and slide the
splash cover between the mixer head and the
beater. lower the mixer head and position the
slash cover on top edge of the bowl.
WARNING
Avoid contact with beater/dough hook/whisk
during operation. Keep hands, hair, clothing,
spatulas and other utensils out of the way to
prevent personal injury or damage to the mixer.
Functions
OPERATING THE MIXER
1. Ensure the power cord is unplugged and the
speed control dial is in the OFF position.
2. Assemble the bowl and mixing / whisking tool,
as noted in the previous section.
3. Unwind the power cord completely and insert
the power plug into a grounded wall outlet.
4. Always begin mixing by selecting a low speed
setting on the speed control dial. Starting on a
low speed will prevent ingredients splattering.
Increase the speed as suited to the mixing
task. The speed setting can be adjusted during
operation. If necessary, stop the mixer during
operation and scrape any food mixture down
the sides of the mixing bowl with a spatula.
5. Do not turn the mixer on with the scraper beater
in place if the mixing bowl is empty. This will
cause the scraper beater to make a loud noise
as it scrapes the bowl.
6. Under heavier loads or extended mixing time,
the motor head may become warm. This is
normal and should not cause concern.
Count-up and down timer
The timer is for gauging mixing time,
making it easier to repeat the results.
Set the timer using the arrow
buttons beside the LCD.
