background image

20

Motor base
To clean the motor base, wipe with a soft, damp 

cloth then dry thoroughly. Wipe any excess food 

particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleansers 

on either the motor base or the jug, as they may 

scratch the surface. Use only warm soap water 

with a soft cloth.
Stubborn food stains and odours
Strong smelling foods such as garlic, fish and 

some vegetables such as carrots may leave  

an odour or stain the bowl or lid. 
To remove, pour warm soapy water and fill  

to the MAX LIQUID mark. Set aside to soak for  

5 minutes, without immersing the whole bowl.  

Then wash with a mild detergent and warm  

water, rise well and dry thoroughly. Store the  

bowl with the lid off. 
Storage
Place the large food pusher (with medium and 

small pushers inserted) into the feed chute  

for storage. 
Store your food processor upright, with the 

bowl and lid resting in position, but not locked. 

Locking the bowl and lid can put unnecessary 

strain on the safety interlock. 
All accessories should be kept in the storage 

container and out of the reach of children to 

avoid accidental cuts. It is not recommended to 

store the discs in a drawer with other utensils. 
Do not place anything else on top of your food 

processor during storage.

Summary of Contents for BFP820


















Reviews: