Sage Nutri Juicer Plus BJE520, Quick Manual

7

EN

Assembly

BEFORE FIRST USE

Before using your juicer for the first time, remove 

any packaging material and promotional stickers 

and labels. Ensure the appliance is switched off at 

the power outlet and the power cord is unplugged.
Wash the filter bowl surround, Nutri Disc

™

, juicer 

cover, Froojie

®

 Disc, Froojie

®

 Insert, food pusher, 

pulp container and juice jug and lid in warm, soapy 

water with a soft cloth. Rinse and dry thoroughly. 

The motor base can be wiped with a damp cloth. 

Dry thoroughly.

FOR USE WITH JUICE EXTRACTOR

1.  Place the motor base on a flat, dry surface such 

as a bench top. Ensure that the motor base is 

switched OFF at the control panel, then switch 

the appliance off at the power outlet and unplug 

the cord.

2.  Place the filter bowl surround on top of the 

motor base.

3.  Align the arrows at the base of the Nutri Disc

™

with the arrows on the motor drive coupling 

and push down until it clicks into place. Ensure 

the Nutri Disc

™

 is fitted securely inside the filter 

bowl surround and onto the motor base.

4.  Place the juicer cover over the filter bowl 

surround, positioning the feed chute over the 

juice disc and lower into position. 

5.  Raise the safety locking arm up and locate it 

into the two grooves on either side of the juicer 

cover. The safety locking arm should now be in 

a vertical position and locked into place on top 

of the juicer cover. 

6.  Slide the food pusher down the feed chute by 

aligning the groove of the food pusher, with the 

small protrusion on the inside top of the feed 

chute. Continue to slide the food pusher down 

into the feed chute.