Sage the Paradice 16 BFP838, User Manual

15

EN

Functions

Pressing the PULSE button will cause the 

motor to operate only while the button is held 

down. Sequential presses will cause the timer 

to count up the collective processing time. This 

momentary operation is ideal for foods that 

need sudden bursts of power to encourage 

ingredients to move or be integrated, or with 

food types that only require processing for short 

periods.
Use a combination of the PULSE and PLAY 

| PAUSE buttons for more control when 

processing ingredients.

Timer

During operation the timer will count-up from 

zero to display the accumulated processing 

time. Continuous operation will stop if the timer 

reaches 20 minutes (19:59) and the unit will 

return to standby mode.
To control the processing duration – press 

the up or down arrows to set the timer for any 

recipe that requires a specific length of time 

the ingredients should be processed. Each 

single press will adjust by 5 seconds, holding 

the button will adjust in 10 second or higher 

increments. The TIMER icon will be displayed 

on the screen.

Press PLAY | PAUSE to initiate processing 

and the unit will operate as the displayed time 

counts down. The motor will run continuously 

until the timer reaches zero. Removing the large 

pusher or using the pause function will not 

affect the set time during processing. Pressing 

POWER or PULSE buttons during operation 

will clear the timer and return to standby.

After 

Processing

Wait until the blades or discs have stopped 

moving before unlocking the lid. Ensure that 

the unit has been turned off using the POWER 

button and unplug at the power outlet before 

handling the blades or discs.
When removing the blades or discs, lift the part 

by carefully gripping the plastic hub area in the 

center.

OPERATION

Getting started

The food processor will only operate when 

the processing bowl, lid and large pusher are 

correctly assembled. This engages the safety 

interlock, and allows the motor to run.
The chute has a CHUTE FILL MAX graphic to 

indicate the maximum volume of food that can 

be placed in the chute for the pusher to activate 

the feed chute safety system.

Control Panel

When the machine is connected to the power, 

and the POWER button is pressed; the 

buttons and screen will illuminate and the food 

processor will be ready to operate. Pressing the 

POWER button at this stage will turn the unit off.
Pressing the PLAY | PAUSE button will start 

the motor to run continuously, and the timer will 

count up to show processing time.

Press PLAY | PAUSE again while processing 

and the motor will stop. The timer will stop and 

both the pause icon and PLAY | PAUSE button 

will flash. Press PLAY | PAUSE to continue 

processing or press POWER to return to 

standby.

Removing the large pusher during processing 

will stop the motor. The timer will stop, the 

INSERT PUSHER icon will be displayed and the 

PLAY | PAUSE button will flash. Ingredients can 

be added into the lid chute, and when the large 

pusher is re-inserted, the unit will continue to 

process.