Sage the Scraper Mixer Pro BEM800UK, Instruction Book

6

ASSEMBLY & 

DISASSEMBLY

BEFORE FIRST USE 

•  Wash bowl and mixing tools in warm soapy water with a soft cloth. Rinse 

and dry thoroughly. 

•  The bowl and the attachments may be washed in the dishwasher. 

•  When first using your bench mixer, you may notice an odour coming from 

the motor. This is normal and will dissipate with use. 

ATTACHING THE BOWL 
1.  The mixer motor head should be in the horizontal (closed) position 

when moving. 

2.  To remove or insert the mixing bowl, the mixer motor head must be 

raised and locked into the open position. Raise the mixer motor head 

by pressing the TILT RELEASE button (see fig.  1  ).

3.  Lift the motor head up until it tilts back and locks into the open position 

(see fig.  2  ). 

4.  Insert the bowl into the bowl locking recess and turn clockwise until the 

bowl locks securely into place (see fig.  3  ). 

ATTACHING MIXING AND WHISKING TOOLS 
1.  Raise the motor head by pressing the TILT RELEASE button. 

2.  Align the groove in the top of the mixing attachment with the locking pin 

on the spindle extending down from the mixer motor head. 

3.  Push the attachment upwards and turn clockwise until it locks securely 

onto the locking pin on the spindle (see fig.  4  ). 

4.  Lower the motor head by pressing the TILT RELEASE button and 

gently lowering until it locks into the closed position. 

5.  The splatter guard can now be assembled if required. Slide the main 

ring into position on top of bowl, then assemble the pour spout. 

DISASSEMBLING THE MIXER 
1.  When mixing is complete, turn the speed control dial to the 

OFF|STANDBY position, switch the appliance off at the power outlet 

and unplug the cord. 

2.  To remove splash guard, separate the pour spout, then slide main ring 

out of position. 

3.  Raise the mixer motor head by pressing the TILT RELEASE button.  

Lift the motor head up until it locks into the open position. 

4.  Remove the mixing or whisking tool by holding the mixer motor 

head and pressing the tool upwards on the spindle. Then turn the 

attachment anti-clockwise to TILT RELEASE it from the pin on  

the spindle. 

5.  TILT RELEASE and remove the mixing bowl from locking recess on 

mixer base by turning anti-clockwise. 

6.  Lower the mixer motor head by pressing the TILT RELEASE button 

and lowering the mixer motor head down until it locks into the 

horizontal position.

TIP

When lowering or lifting the mixer, always support the motor head with your 

other hand to prevent from free-falling. 

OPERATION

USING THE SCRAPER BEATER 
The Scraper Beater can be used for a variety of mixing tasks. 
Due to the efficient mixing action of the Scraper Beater, the mixing time 

of many recipes will be reduced. Refer to the chart below for approximate 

mixing times. These are a guide only. Longer mixing times may be required 

for larger or double quantities (see table 1). 

NOTE

Do not use the Scraper Beater for mixing heavy batters, doughs, whisking 

egg whites or whipping potatoes.

TIP

•  When adding flour to the mixing bowl, always use the pouring shield and 

ensure the mixer is on the FOLD/KNEAD setting. This will prevent flour 

from escaping the mixing bowl. 

•  The Scraper Beater can also be used as a spatula when removing 

mixtures from the mixing bowl. 

FUNCTIONS

OPERATING THE MIXER 
1.  Ensure the power cord is unplugged and the speed control dial is in 

the OFF position. 

2.  Assemble the bowl and mixing / whisking tool, as noted in the previous 

section. 

3.  Press the TILT RELEASE button and lower the mixer head until it locks 

into the closed position (see fig.  5  ). 

4.  Attach the pouring shield, if desired. 

5.  The LED’s on the speed indicator will illuminate one-by-one all the way 

to the top, then turn off one-by-one. The LCD screen will display 0:00. 

6.  Always begin mixing by selecting a low speed setting on the speed 

control dial. Increase the speed as suited to the mixing task. If 

necessary, stop the mixer during operation and scrape any food 

mixture down the sides of the mixing bowl with a spatula. 

7.  If the mixer has not been used for 5 minutes it will automatically 

change from STANDBY mode to a power saving OFF mode and the 

illuminated LED will switch off. To exit OFF mode and begin mixing, 

turn the dial to the selected speed or press one of the count up/down 

timer buttons. 

8.  Do not turn the mixer on with the scraper beater in place if the mixing 

bowl is empty. This will cause the scraper beater to make a loud noise 

as it scrapes the bowl. 

9.  When ingredients are in the mixing bowl, the scraper beater may make 

a slight noise as it scrapes the sides and bottom of the bowl. This is 

normal and should not cause concern. 

10.  Under heavier loads or extended mixing time, the motor head may 

become warm. This is normal and should not cause concern.