Annex A - Troubleshooting
SAGEM F@st™ 1201/1241 Reference Manual - 288110393-01
Page A-8
Sagem Communication
document. Reproduction and disclosure prohibited
A.6 Reinitialising
your
router
To Reinitialise your router, click button "Reboot" at the top right of the welcome page of your
HTTP configurator. When you click this button all the LEDs get off ; the "
@
" LED (Internet) lights
in green and gets off then the
"
"
LED
(PWR) lights in green and the initialisation process
starts. It lasts for around a minute.
Note :
The green "
" (LINE) and
" (LAN) LEDs light if they are connected.
The "
@
" LED (Internet) lights in green if "PPP" link is established.
A.7 Re-establishing the factory configuration
To undertake the procedure, there are two possibilities:
1) Using the HTTP configurator
•
In the welcome screen of your HTTP configurator, select the heading
Management
followed by the sub-menu
Restore Default
in the
Settings menu
(cf. 5.10.1.3).
2) Using the "REG" button
•
press
the
REG
pushbutton for at least 15 seconds; all the LEDs get off; the "
@
" LED
(Internet) lights in green and gets off then the
"
"
LED
(PWR) lights in green and the
process for returning to the factory configuration starts.
This operation deletes the entire personalised configuration of your
router: Password, Configuration, etc. It lasts for around 2 minutes.
After a return to factory configuration, it is
necessary to install your router again
using the installation CD-ROM, or to enter again the ADSL connection data supplied
by your
I
nternet
S
ervice
P
rovider (ISP) (cf. Internet Connection section - § 5.6).
Summary of Contents for 1201
Page 1: ...SAGEM F stTM 1201 1241 Reference Manual 288 110 393 01 Edition of October 2006...
Page 2: ......
Page 157: ......
