background image

I

NTRODUCTION

Dear customer:

Thank you for purchasing a SAGEM DECT telephone; we appreciate your trust in us.

This product was manufactured with the utmost care, should you encounter any difficulties during its use, we
recommend that you refer to this user guide. You can also find information on the following site:

http://www.sagemcom.com

For your comfort and safety, we ask that you read the following paragraph carefully:

Recommendations and safety instructions

Your DECT telephone must not be installed in a humid room (wash room, bathroom, laundry room,
kitchen, etc.) unless it is 1.50 m away from a water point, or outside. Your telephone must be
operated at temperatures ranging from 5°C to 45°C.

Only use the supplied power adapter, connect it to the base socket according to the installation
instructions provided in this booklet and the indications on the identification label affixed to it
(voltage, current, electric network frequency). As a safety measure, you can use the power adaptors
to cut off the 240V current in case of danger. They must be located near to the device, and must be
easily accessible.

This telephone was designed for use on the public switched telephone network (PSTN). In case of
a problem you must first contact your reseller. Only use the supplied telephone cord.

For your personal safety, never place your handset on the base without the batteries, or without the
battery cover, you could get an electric shock.

To avoid damaging your handset, only use certified rechargeable AAA batteries NiMH 1.2 V
600 mAH, never use non rechargeable batteries. Insert the batteries in the handset battery
compartment respecting polarity.

At the end of their useful life, batteries must be disposed of according to the recycling instructions
presented in this booklet.

Your DECT telephone has an inside radio range of about 50 metres and up to 300 metres in open
space. The immediate presence of metal parts (of a television for example), or of any electric
appliance may result in range reduction.

Some sensitive medical equipment and safety equipment may be affected by the radio-frequency
transmissions of your telephone. In all cases, we ask that you respect the safety recommendations.

In areas where storms are frequent, we recommend that you protect your telephone line using a
surge protection device.

This equipment does not function in the case of an electric network shutdown: For the
emergency calls, use a self-contained cord telephone.

The CE marking certifies that the product meets the essential requirements of Directive 1999/5/CE
of the European Parliament and of the Council pertaining to microwave radio equipment and
telecommunication terminal equipment, for the safety and health of users, for electromagnetic
interference. Furthermore, it efficiently uses the frequency spectrum attributed to ground and spatial
communication to prevent damaging interference.

The declaration of compliance may be looked up on the 

www.sagemcom.com

 site, section

"

support

" or can be obtained from the following address:

SAGEMCOM SAS

250, route de l'Empereur - 92500 Rueil-Malmaison - France

Summary of Contents for D23XL





































Reviews: