background image

6

Y

OUR

 

TELEPHONE

Turning the handset on and off

To turn the handset off, hold down the red key 

 and the message "Thank You Goodbye"

is displayed briefly on the screen.  Your handset is now off.

To turn your handset back on, hold down the green key 

.

Information is displayed on the screen, including the name and number of the handset (for
instance HANDSET -2 -), the date and the time. If the message "

Please Register

" is

displayed, refer to page 83 to register your handset to the base.

Replacing the batteries

Turn off the handset, and then turn it over to
access the battery compartment cover

Insert a sharp object (pen, paper clip...)
perpendicularly in hole 1 as shown in the
illustration and lift it upwards, the battery
cover opens, slide it downwards as shown in
2.

Remove the old batteries, and insert the new
batteries in the battery compartment, with the
polarity of each of them aligned as depicted
on the handset label. Replace the handset
battery compartment cover by pushing it
upward until fully closed.

At the end of their useful life, batteries must
be disposed of according to the recycling
instructions presented in this booklet.

To avoid damaging your handset, only use certified rechargeable AAA batteries, 
never use non rechargeable batteries.

1

2

LU D85C UK.book  Page 6  Jeudi, 16. décembre 2004  5:30 17

Summary of Contents for D85C









































































































Reviews: