16
C
ORDLESS
H
ANDSET
Intercom
To communicate between handsets, both handsets must be matched to a single base, and
must be within range of the base.
This unit shall support the intercom call between 2 (or more up to 5) registered handsets of the
same base station and conference call between 2 registered handsets and 1 external line.
Make an intercom call
- Press and hold " #/INT " button on the handset 1 in standby mode, a list of handset which is
available to call is shown.
- Use the keypad to enter the number of the desired handset. To select the specific handset
2, the audio dial tone can be heard in the earpiece for 20 seconds. If you want to exit internal
call mode, press
back
key to return to standby.
- Press Talk/Speaker On/Off button on the handset 2 to answer the call from handset 1.
- Press Talk/Speaker On/Off button or put back on cradle to terminate the internal call and
then go back to standby.
Incoming call - when you are making an intercom call
1. Press Talk key to answer external call and then put the internal call on hold or press Talk
again to release the current internal call. The handset will then ring.
2. Press Talk to answer the incoming external call.
Call transfer and Conference
This function is only accessible when two handsets or more are registered to the same base.
During communication, you can transfer the call to another handset.
- When handset1 is having an external call, press and hold #/INT to start an intercom
connection. The external call will be on hold and the phone icon will blink.
- Press 2 key to call handset2. When the handset2 answer the call,
- Press Option and select "
Call Transfer
" from the Menu. The external call will be transfer to
handset 2 .
- Alternatively, select Switch Calls to toggle between the held external call and internal call.
The held call icon will flash.
Start a 3-party conference call, select Conference. In the conference call mode, press
Option
key to select "
Switch to Ext
" to talk to external caller; select "
Switch to Int
" to talk to internal
caller.
To retake the call before it is picked up by the handset called, press and hold #/INT key.
LU 252976139A D86C EN.book Page 16 Vendredi, 3. août 2007 9:56 09
