16
Recording a telephone conversation
Recording a telephone conversation
You can record a telephone conversation. After recording,
the
ä
- button flashes, and you can hear the record-
ing like a message on the answering machine.
Recording a telephone conversation
Recording a telephone conversation
1
During a telephone call, press
b
. The recording begins.
2
Press
b
again to end the recording.
Forwarding a call
Forwarding a call
You can forward calls from the device to registered cordless
telephones. From the cordless telephone, you can forward
calls to the device or to other cordless telephones.
From device
to a cordless telephone
1
During a call, press
{
.
2
Dial the number of the cordless telephone using the nu-
meric keypad.
3
Hang up.
To all cordless telephones
1
During a call, press
{
.
2
Hang up.
From the cordless telephone
To the device
1
During a call, press
ô
Menu
.
2
Using
[
select
CALL TRANSFER
.
3
Confirm with
OK
.
4
Using
[
select
HANDSET 0
.
5
Confirm with
OK
.
6
Press
’
to hang up.
To other cordless telephones
Forwarding a call to Dect
Existence of several devices is the prerequisite
1
During a call, press
ô
Menu
.
2
Using
[
select
CALL TRANSFER
.
3
Confirm using
OK
.
4
Select the cordless telephone to which you would like
to transfer the call using
[
.
5
Confirm using
OK
.
6
Press
’
, to hang up.
Getting back the telephone call
You can get a transmitted telephone call back, before the
cordless telephone is picked up.
1
Press
ô
Menu
.
2
Using
[
select
HANGING UP
.
3
Confirm using
OK
.
Placing internal calls
From device
Calling a cordless telephone
1
In starting mode, lift the handset.
2
Press
{
.
3
Dial the number of the cordless telephone using the nu-
meric keypad.
Calling all cordless telephones
1
In starting mode, lift the handset.
2
Press
{
.
Terminating intercom
From the cordless telephone
Calling the device
1
In the starting mode, press
{
.
2
Dial using
[
HANDSET 0
.
3
Press
ô
Call
.
Calling other cordless telephones
Intercom Dect
Existence of several devices is the prerequisite
1
In the starting mode, press
{
.
2
Using
[
dial the cordless telephone you would like to
call.
3
Press
ô
Call
.
Caller Line Identification Presen-
tation (CLIP)
Country- and Network-Specific
(country and network dependent)
CLIP Definition
The number of an incoming call appears on the display.
For this function to work, the caller line identification
(CLIP – Caller Line Identification Presentation) must be
activated for your telephone connection. Enquire with
your telephone company. Caller identification may be as-
sociated with a fee.
Setting the Country
You must inform your caller when recording a tele-
phone conversation.
This function is available only if you have registered
several cordless telephones with your device and the
telephones are within the range of the machine.
You can also terminate an internal telephone call by
pressing
{
without hanging up. You can place an in-
ternal or external call.
This function is available only if you have registered
several cordless telephones with your device and the
telephones are within the range of the machine.
If the caller line identification does not work even
though the function is activated for your telephone
connection, check if you have set the correct country
(also see Chapter "Settings", Page 37)
Summary of Contents for IP PHONEFAX 49A
Page 1: ...User Manual...