45
Connection to the Telephone Line
Line terminal
The device is a line terminal. That is, you cannot connect
additional telephone or additional devices serially down-
stream of the device to the same telephone socket.
Last telephone socket
Using Additional Telephones (Ea-
sylink)
Easylink
With the Easylink function, you can control your machine
with additional telephones. To use this function, addition-
al telephones must be set to tone dialling (DTMF tones);
see here the user manual of your additional telephone.
Starting Fax Reception
If you pick up on an additional device and hear that you
are receiving a fax message (whistle or silence), you can
start the fax reception by pressing
*5
on the additional
telephone or the
o
button on the machine.
Taking Over the Line
If you pick up on an additional telephone and the machine
continues to ring or attempts to receive a fax, you can dis-
connect the machine from the line. Press
**
on the ad-
ditional telephone.
Changing Codes
Easylink Codes
1
Press
OK
,
54
and
OK
.
2
Enter the new code for starting fax reception.
3
Confirm with
OK
.
4
Enter the new code for taking over the line on an addi-
tional device.
5
Confirm with
OK
.
If you have several telephone sockets for the same
connection, the device must be connected to the last
telephone socket.
Only change the codes if it is absolutely necessary.
The codes must begin with
*
or
#
and must be
different.
Summary of Contents for IP PHONEFAX 49A
Page 1: ...User Manual...