1. Installation
1. Installation
11
Chapter 1. Installation
10
Wait until
insert
card
appears on the display.
Push the Plug’n’Print card of the new toner cartridge
into the opening on the left side next to the paper
tray, with the contacts facing to the left. (Only the
starter cartridge can be used without inserting a
Plug’n’Print card.)
¡
Should the error message
Cannot
read
card
appear on the display, you may have
inserted the Plug’n’Print card incorrectly. Th
e con-
tacts must face to the left as you insert the card
into the machine.
11
It may take a moment to update the cartridge. When
the process is completed, the following appears on
the display:
action
completed
/
remove
card
12
Pull the Plug’n’Print card out of the fax machine.
You can interrupt the recharging process at any time by
simply pressing
STOP
. However, the toner level memo-
ry must be updated for each new toner cartridge. If you
have pressed the
STOP
key by mistake, you can restart
the recharging process as follows:
1
Press
MENU/OK
,
62
and
OK
2
Select
new
black
with
¾
, and confi rm with
OK
. Select
yes
with
¾
. After a short time, the fax
machine will ask you to insert the Plug’n’Print card.
If the toner level of your cartridge is low, then every time
you open and close the cover, the following question will
appear on the display:
black=new?
If you have not
installed a new cartridge, press
STOP
. If you have in-
stalled a new cartridge, press
OK
and follow the descrip-
tion set forth above.
Displaying the Toner Level
Æ
Whenever you insert a new toner cartridge,
you must update the toner level memory of
your fax machine with the Plug’n’Print card that is
included with the new cartridge. Your fax machine
registers the extent of toner usage for every print-
out and calculates the toner level of the cartridge
based on this. Th
e indicated toner level is only
meaningful if you update each new toner cartridge
with the Plug’n’Print card provided.
1
Press
MENU/OK
,
62
and
OK
.
2
Select
cart
capacity
with
¾
and confi rm
with
OK
. Th
e toner level of the toner cartridge is
indicated by a percentile value between 100 percent
(full) and 0 percent (empty).
3
Pressing
C
will return you to the previous menu step;
pressing
STOP
will return you to the root menu.
Paper
Before your fax machine will be ready to make copies
or receive faxes, you must load paper into the machine.
Use the following paper sizes:
A4
, 210 × 297 millimetres,
letter
, 216 × 279 millimetres (8.5 × 11 inches), or
legal
,
216 × 356 millimetres (8.5 × 14 inches). Your fax machine
works with normal copier paper and with typewriter pa-
per (60 to 90 g/m
2
). Please use only 90 g/m
2
stock for
legal-sized paper. You can use paper of all three sizes as
input documents and as output paper.
Loading Paper Size A4
1
Pull out the paper tray.
2
Separate the paper sheets by fanning them out,
then align them by tapping edge of the stack lightly
Summary of Contents for MF 3265
Page 1: ...User Manual FAX 3245 MF 3265...
Page 44: ...44 ChapterAppendix...