MF5482
- 32 -
6 - Parameters/Setup
Parameters/
Setup
You can setup your machine as you like depending on the
use. You will find in this chapter description of the
functions.
You can print the functions guide and the available setup
of your multifunction machine.
Remote configuration
You may configure the same parameters by remote as
you would locally.
Conditions required
To be able to configure your machine by remote, you
must:
• have a Web browser on your PC (Internet Explorer
version 4 or above for optimal operation).
• define your machine’s local network settings - IP
address, subnet mask, etc. (see
Network features
,
page 48).
Accessing the embedded Web server
1
Open a Web browser using a PC that is registered
on the network.
2
Enter the IP address of the machine in the Address
field and confirm by pressing Enter.
3
When the homepage opens, select the interface
language.
4
Modify the parameters you want on screen then
confirm.
Date/Time
At any moment you may change the date and time on
your multifunction machine.
Depending on the country configured on the machine, the
date format is of type DDMMYY (e.g.: France) or
MMDDYY (e.g.: USA).
21 - SETUP / DATE/TIME
1
Press
, enter
21
using the keypad. Confirm
with
OK
.
2
Enter the numbers of the required time and date
one after another (for example November 8 2004 at
9h33, press 0811040933 or 1108040933) and
press
OK
to confirm.
3
To exit this menu, press
.
Summer time / Winter time setting
This menu lets you choose to change to summer / winter
time automatically or not.
The
21>DATE/TIME
menu includes 2 submenus:
Manual mode
211 - SETUP / DATE/TIME / MODIFY
Your multifunction machine will prompt you to change the
date and time via the numerical keypad.
Automatic mode
212 - SETUP / DATE/TIME / AUTO ADJUST
If you select
OFF
and confirm with
OK
, the summer /
winter time will not be changed automatically. For the
machine to be set to the new time, you will need to use the
211 MODIFY
menu.
If you select
ON
and confirm with
OK
, you will not have to
care about any change at the end of March (+1h) and
October (-1h). You will just be informed of this change by
a message on the screen.
The default parameter is
OFF
.
Warning message
On automatic changing to summer / winter time, a
message will be displayed to inform you that the
multifunction machine time has been changed.
or
Your next action on the multifunction keypad will cause
the message to be automatically cleared.
Note
Your machine is continuously being
updated, new functions are regularly
made available.
To benefit, visit our website
www.sagem-communications.com. You
can also use the update function
available with the Companion Suite Pro
software to download the latest online
updates (see
Firmware update
,
page 92).
Note
Remote configuration is also possible if
you have installed the Companion
Suite software on your PC (see
Links
,
page 71).
Important
This function is only available if the
country configured on the machine is
part of the European Union.
25-03-07 02:01
CHECK TIME
28-10-07 02:01
CHECK TIME
