MF5482
- 52 -
9 - Network features
3
Select
SETUP WIZARD
using the keys or
and confirm with
OK
.
The machine searches for existing networks.
4
Select
NEW NETWORK
using the keys or
and confirm with
OK
.
5
SSID appears on the screen, enter the name of
your network using the numerical keypad, pressing
the keys one after the other until you obtain the
name you want (32 characters maximum) and
confirm with
OK
.
6 AD-HOC MODE
or
INFRA. MODE
appearson the
screen. Select
AD-HOC MODE
and confirm with
OK
.
7
7 The sub-menu
CHANNEL
appears, enter a
figure between 1 and 11 and confirm with
OK
.
8
Select your encryption method,
OFF
or
WEP
and
confirm with
OK
:
- If you choose
WEP
, enter the
WEP
key that you
are using on your network.
9
9
IP CONF.: MANU
or
IP CONF.: AUTO
appear on
the screen.
If you choose to set up the system manually, go to
the next paragraph and enter the parameters
IP ADDRESS
,
SUBNET MASK
and
GATEWAY
.
10
When you press
OK
, the machine reboots to take
into account the new WLAN parameters.
Once the network has been set up, the LED of the WLAN
USB key should be on.
Referring to or changing your
network parameters
Each of the parameters of your network may be changed
as your network develops.
2822 - SETUP / WLAN / PARAMETERS / IP
ADDRESS
1
Type in , select the menu
SETUP
using the keys
or and confirm with
OK
.
2
Select
WLAN
using the keys or and confirm
with
OK
.
3
Select
PARAMETERS
using the keys or and
confirm with
OK
.
4
Select
IP ADDRESS
using the keys or and
confirm with
OK
.
5
The number of your IP address will appear in the
format
000.000.000.000
.
Enter the new IP address
for your machine in the format displayed and
confirm with
OK
.
6
Exit this menu by pressing the
key
.
2823 - SETUP / WLAN / PARAMETERS / SUBNET
MASK
1
Type in , select the menu
SETUP
using the keys
or and confirm with
OK
.
2
Select
WLAN
using the keys or and confirm
with
OK
.
3
Select
PARAMETERS
using the keys or and
confirm with
OK
.
4
Select
SUBNET MASK
using the keys or and
confirm with
OK
.
5
The number of your subnet mask will appear in the
format
000.000.000.000
.
Enter the new submask
of your machine in the format displayed and
confirm with
OK
.
6
Exit this menu by pressing the
key
.
2824 - SETUP / WLAN / PARAMETERS / GATEWAY
1
Type in , select the menu
SETUP
using the keys
or and confirm with
OK
.
2
Select
WLAN
using the keys or and confirm
with
OK
.
3
Select
PARAMETERS
using the keys or and
confirm with
OK
.
4
Select
GATEWAY
using the keys or and
confirm with
OK
.
5
The number of your gateway will appear in the
format
000.000.000.000
.
Enter the new gateway
for your machine in the format displayed and
confirm with
OK
.
6
Exit this menu by pressing the
key
.
2825 - SETUP /WLAN / PARAMETERS / SSID
1
Type in , select the menu
SETUP
using the keys
or and confirm with
OK
.
2
Select
WLAN
using the keys or and confirm
with
OK
.
3
Select
PARAMETERS
using the keys or and
confirm with
OK
.
4
Select
SSID
using the keys or and confirm
with
OK
.
5
The name of your network will appear on the
screen. Enter the new name of your network and
confirm with
OK
.
6
Exit this menu by pressing the
key
.
2826 - SETUP / WLAN / PARAMETERS / MODE
1
Type in , select the menu
SETUP
using the keys
or and confirm with
OK
.
2
Select
WLAN
using the keys or and confirm
with
OK
.
Important
Please note that in ad-hoc mode,
the WPA/WPA2 encryption method
is not available.
Note
The WEP key number may be
configured in the menu:
29 - SETUP /
TECHNICALS / WEP KEYS NBR
.
