17
I
NSTALLATION
Using the device for the first time, without an Ethernet cable connection
(continued)
Screen on the
right
Screen shot
Next screen
Comment
8
"OK" button
!
You could have the option to connect to the internet through a proxy server. If you are
connected directly to the internet, select «No». Otherwise, activate this option and enter the
IP address and the port of your proxy server.
9
"OK" button
Confirm the
settings above.
10
Apply new settings.
! If the connection fails, check that your access point does not require a specific
registration procedure. Some access points require, for example, that you press a
specific button during the step 9 above.
11
The device is now
in wireless client
mode.
12