57
Ringing tones
If you want the ringing tone of your phone to be replaced by the vibrator and
the beeps to be suppressed (except for the alarm tone), tick the box and
validate by pressing
OK
.
You can also activate/deactivate the silent mode by holding down the
∗
key.
This mode is indicated by the symbol on the screen.
Different controls are available:
Setting the keypad tones
Select the tone required using the scrolling arrows and validate (press the
righthand key).
Setting the network tone
If you want your phone to give a warning beep when it locates a network on
which it can communicate:
Tick the box and validate by pressing
OK
.
Setting the low battery tone
If you want your phone to give a warning beep when your battery is low:
Tick the box and validate by pressing
OK
.
Selecting silent mode
(Depending on model)
Setting the beeps
Silent mode is automatically
deactivated when the hands free
car kit is connected as well as when
the phone is switched on/off.
You can select the tones produced
by your keypad: Beep, DTMF
(musical keys) or non active tones
(in this last case, when you press
your keyboard, it does not make a
noise).
251967582_myX1-2_lu_en.book Page 57 Vendredi, 1. avril 2005 10:05 10