22
Sagem · SPFX 43 · 47 · SP 4840
EN
Sending Fax Later
Sending Fax Later
If you would like to make use of the lower telephone tariffs
or if the recipient can be reached at some specific time
only, you can send the fax at a later time—within 24 hours.
1
Insert the document.
2
Press
OK
,
33
and
OK
.
3
Enter the time, at which the document should be trans-
mitted, e.g.
14
00
for 2 pm.
4
Confirm with
OK
.
5
Enter the desired number using the numeric keypad or
select a saved entry.
6 Selecting a Saved Entry:
Confirm the selected
entry using
OK
.
7
Press
o
. The device goes into standby mode and trans-
mits the fax at the entered time. You can continue to
make telephone calls and receive faxes
Sending Fax Later
Fax Reception
Fax Reception
If you have not changed the factory settings, received faxes
will be printed out automatically. If no paper or no ink
film is inserted, the device saves the incoming faxes. The
ä
key blinks. Once paper or a new ink film is
inserted, the saved faxes are printed out.
Paper Not Inserted Correctly
Message Memory Full
If the message memory is full, no additional messages can
be received. A warning appears on the display. Follow the
specifications in the technical data.
Delete Fax Memory Service Code
Receiving Fax Manually
Select manual reception under number of rings of the fax
switch (see Chapter Setting the Fax Switch, page 29). The
device will not receive faxes on its own. This setting is use-
ful, when you want to receive faxes via a modem connected
to a computer.
Receiving Fax Manually
You can start fax reception manually, by pressing
o
.
Polling Faxes
Fax Polling
With the fax polling function, you can retrieve faxes that
lie ready in the dialled device. You can keep a document
ready in your device, which can be polled by others.
Polling Faxes Directly
1
Enter the desired number using the numeric keypad or
select a saved entry.
2
Hold
o
pressed (for at least two seconds).
Polling Secure Faxes
Secure Fax Polling
With this function, you can poll faxes that are protected
with a code.
1
Press
OK
,
31
and
OK
.
2
Enter the code.
3
Confirm with
OK
.
4
Enter the desired number using the numeric keypad or
select a saved entry.
5
Press
o
.
Polling Send of Faxes
Unauthorised Fax Polling!
Secure Fax Polling
A caller who knows the code can poll the fax from your
device. You can continue to make telephone calls and
receive faxes
1
Insert the document.
2
Press
OK
,
32
and
OK
.
3
Enter a code (max. 20 characters).
4
Confirm with
OK
.
Sending Fax Later
Using Fax Templates
Fax Templates
Five fax templates, which you can use, are stored in your
device. With these templates you can quickly create, for
example, a short fax note or an invitation.
1
Press
OK
,
43
and
OK
.
2
Use
[
to select the template you would like to print.
3
Confirm with
OK
. The device prints the template.
4
Fill the template and send it to the desired recipient per
fax.
Notice
Cancel a Scheduled Fax Transmission
Press
j
to eject the document. This interrupts
the standby mode.
Notice
Paper Not Inserted Correctly
Check if you have inserted clamped paper cor-
rectly. The lever on the right hand side next to
the paper feeder must be folded backwards.
Notice
Delete Fax Messages Sent
If there are problems with printing out saved fax
messages, a service code is available (see also sec-
tion
Service
, page 37).
CAUTION!
Unauthorised Fax Polling!
Protect your document against unauthorised
polling with a code.
Notice
Cancel a Scheduled Fax Transmission
Press
j
to eject the document. This interrupts
the standby mode.
Summary of Contents for Phonefax 4840
Page 1: ...User Manual...
