For experienced Users: AT commands
TELSAT GPRS
69
Datei 8123AD010_11.doc
Datei gespeichert
08.03.04 17:31 von EDV/ORGA
Druckzeit 08.03.04,
17:44
Status Release
Command
Function
(factory setting in bold print)
AT+CGQMIN=
[
cid
[,
precedence
[,
delay
[,
reliability
[,
peak
[,
mean
]]]]]]
Quality of Service Profile (Minimum acceptable)
cid =
a numeric parameter which specifies a particular PDP
context definition (see the +CGDCONT and +CGDSCONT
commands)
precedence
=
numeric parameter for the precedence class
0: network subscribed value
1: High Priority Service commitments shall be maintained
ahead of precedence classes 2 and 3
2: Normal priority Service commitments shall be maintained
ahead of precedence class 3
3: Low priority
delay
=
numeric parameter for the delay class
reliability
=
numeric parameter for the reliability class
0: network subscribed value
1: Non real-time traffic, error-sensitive application that cannot
cope with data loss
2: Non real-time traffic, error-sensitive application that can
cope with infrequent data loss
3: Non real-time traffic, error-sensitive application that can
cope with data loss, GMM/SM, and SMS
4: Real-time traffic, error-sensitive application that can cope
with data loss
5: Real-time traffic, error non-sensitive application that can
cope with data loss
peak
=
numeric parameter for the peak throughput class
0: network subscribed value
1: Up to 1000 (8 kbit/s)
2: Up to 2000 (16 kbit/s)
3: Up to 4000 (32 kbit/s)
4: Up to 8000 (64 kbit/s)
5: Up to 16000 (128 kbit/s)
6: Up to 32000 (256 kbit/s)
7: Up to 64000 (512 kbit/s)
8: Up to 128000 (1024 kbit/s)
9: Up to 256000 (2048 kbit/s)
mean
= a numeric parameter which specifies the mean
throughput class
AT+CBST=
[
speed
Select bearer service type. This command selects the bearer
service
name
with data rate
speed
, and the
