Telephone Lines and Additional Devices · DSL Connection
47
EN
ENTER THE OUTSIDE LINE ACCESS CODE
1 Press
OK
,
0522
and
OK
.
2 Enter the outside line access code with which you
reach the public telephone network. This is usu-
ally
0
.
3 Confirm with
OK
.
Spaltenumbruch
DSL CONNECTION
DSL Connection
In the event that you use a DSL modem: Connect the
device to the slot intended for analogue telephones/
fax machines! For additional information, please
consult the operating manual of your DSL system.
Ask your telephone or internet service provider if
necessary.
ISDN CONNECTION
ISDN Connection
Your device is an analogue fax device (Group 3). It is
not an ISDN device (Group 4), and therefore it cannot
be operated directly on an ISDN connection. In order
to do this, you need either an analogue adapter or a
connection for analogue terminals. Details for ISDN
connections can be found in the instructions pro-
vided with the terminal adapter or the dial-up router.
CONNECTING ADDITIONAL
DEVICES
Additional Devices
You can operate additional devices on a telephone
line, such as cordless telephones, answering
machines, modems or charge counters.
CONNECTION TO THE DEVICE
Connection to the Device
You can connect additional devices directly to your
device. Insert the telephone cable of the additional
device into the
Ï/EXT.
socket (RJ-11-connection)
on the device.
Externe Geräte anschließen
CONNECTION TO THE TELEPHONE
LINE
Order of Connections
In order for the fax switch to function, the device
must be first in the series if multiple devices are con-
nected to the same telephone socket. Follow the cor-
rect order.
Connection to the First Telephone Socket
USING ADDITIONAL
TELEPHONES (EASYLINK)
Easylink
With the Easylink function you can control your
device with additional telephones. To use this func-
tion, additional telephones must be set to the tone
dialling mode (DTMF/MFV tones) (for this purpose
see the operating manual of your additional tele-
phone).
STARTING FAX RECEPTION
If you pick up at an additional device and hear that
you are receiving a fax (whistling tone or silence),
you can start the fax reception by pressing
*5
on
the additional telephone or pressing
o
on the device.
Hang up additional telephone
Hang up the additional telephone when the ring tone
changes. The device has accepted the reception of
the fax message.
TAKING OVER THE LINE
If you pick up on an additional telephone and the
device continues to ring or attempts to receive a fax,
you can disconnect the device from the line. Press
**
on the additional telephone.
Notice
INCORRECT OUTSIDE LINE ACCESS
CODE
In rare cases, the outside line access code
may be a different number or a two-digit
number. For older telephone systems, the
outside line access code can be R (=
Flash). Press
Rø
to enter this outside
line access code. If the connection to the
public telephone network is not possible,
contact your telephone system supplier.
Notice
CONNECTION TO THE FIRST TELEPHONE
SOCKET
If you have multiple telephone sockets for
the same telephone line, the device must be
connected to the first telephone socket.
