54
Sagemcom · FAX 4560 · FAX 4565 · FAX 4570 · FAX 4575
EN
7 Close the device.
CLEARING PAPER JAM IN THE FUSER
UNIT
1 Open the paper jam flap on the reverse side of the
device.
2 Remove the paper guide on the fixer unit by press-
ing the tension lever
on both sides
downwards.
3 Carefully pull out the paper.
4 Close the paper jam flap. The fuser levers will
automatically fold into starting position when the
paper jam cover is closed.
FIXING A DOCUMENT JAM
Introduction
If a document jam should occur in the front area:
1 Lift the panel upwards until it snaps into position.
CAUTION!
TONER CARTRIDGE NOT INSERTED
CORRECTLY!
If the device cover would not close, the
toner cartridge is not inserted correctly.
Take the toner cartridge out and insert it
again correctly.
DANGER—HEAT!
DEVICE PARTS ARE HOT!
The fuser unit and and its surroundings
inside the device become hot during
operation. Do not touch these parts if
you have opened the device. Proceed
with care when you are removing a paper
jam for instance.
Notice
CONTINUE PRINT JOB
Press
o
once the fault has been rectified
to continue the print job. Press
j
to
suppress the error message.