- 123 -
MF 6990dn - Agoris C935
15 -
Safety
Safety information
When using the machine, the following safety precautions must always be respected.
Safety during operation
To ensure continuous safe operation of your equipment, follow these safety instructions at all times (the list below is
non-exhaustive and may be added to or changed without prior notice).
In this section, the following symbols are used:
CAUTION
•
Connect the power cable directly to the wall socket and never use an extension flex.
•
Disconnect the power plug (by pulling on the plug and not the cable) if the power cable or plug show signs of wear
or damage.
•
To prevent any risk of electric shock or exposure to laser beams, never remove any cover or screws other than
those specified in the instructions.
•
Switch off the power and disconnect the power plug (by pulling on the plug and not the cable) if any one of the fol-
lowing situations occur:
–
You spill something on the equipment.
–
You suspect the equipment needs maintenance or repair.
–
The equipment cover is damaged.
•
Never incinerate spilled or waste toner. Toner dust may catch fire if it is exposed to an open flame.
Warning
•
Protect the equipment from any humidity (rain, snow, etc.).
•
Disconnect the mains cable from the wall socket before moving the equipment. When moving the equipment, en-
sure that the mains cable does not remain under the machine so as not to damage it.
•
When disconnecting the mains cable from the wall socket, always pull on the plug (and not the cable).
•
Ensure that paper clips, staples and other small metal parts do not fall into the machine.
•
Keep toners (used or unused), toner cartridges (or bottles), ink (used or unused) or ink cartridges out of the reach
of children.
•
Take care not to cut yourself when working inside the machine to remove paper jams.
•
For environmental reasons, do not dispose of the machine or consumables at a household waste collection point.
The equipment can be disposed of at an authorized dealer's or a suitable collection site.
•
Our products are designed to meet the highest requirements in terms of quality and functionality. We recommend
you only use consumables purchased from an authorized dealer.
Warning
This product complies with class A regarding radiated emissions (EN55022), and may create interference with other
information technology equipment or radio-TV or radiocommunications receivers placed in proximity, especially if it is
installed in a residential environment.
The installation instructions in this respect are important and must be adhered to. If it is suspected that this installation
is creating electromagnetic interference, switching it on / off may ensure that it is indeed the source of the interference.
If the interference is created by the installation, preventive measures must be taken to reduce interactions, i.e.:
•
move the affected equipment away as far as possible,
•
redirect or change the position of the antenna of the affected radio or TV receiver,
•
connect the affected equipment to a mains power outlet on a different circuit to that of the source.
CAUTION
Indicates a potentially dangerous situation that may lead to death or
serious injury if instructions are not followed.
Warning
Indicates a potentially dangerous situation that may lead to minor or moderate
injury, or damage the equipment if instructions are not followed.
