- 147 -
MF 6990dn - Agoris C935
16 -
Characteristics
Standard / recycled paper
Recommendations for use
Use
: media suitable for laser printing such as standard or recycled paper.
Do not use the media listed below
:
•
Surface-treated media (such as carbon paper or treated colour paper).
•
Carbon-backed paper.
•
Media not approved for laser (heat-sensitive paper, paper for lamination or filming).
•
Cold transfer media.
•
Press printing media.
•
Specific media for ink jet printers (ultra-fine paper, glossy paper, glossy film, post cards, etc.).
•
Paper pre-printed on another machine:
–
pre-printed on an ink jet printer,
–
pre-printed on a monochrome or colour laser printing and copying system,
–
pre-printed on a thermal printer,
–
pre-printed on another printer or fax machine.
•
Dusty media.
•
Wet or damp paper.
•
Coated paper.
•
Adhesive paper.
•
Folded, creased, warped, embossed, deformed or crinkled paper.
•
Cut-out, perforated or torn paper.
•
Paper that is too supple, too rigid or too fibrous.
•
Paper with a different texture (roughness) on the front and the back.
•
Paper too fine or too thick.
•
Media charged with static electricity.
•
Laminated, gilded or too bright media.
•
Media not withstanding the fusing temperature (180°C [356°F]).
•
Paper not cut at right angles or of irregular dimensions.
•
Paper with glue, adhesive, staples, attachments, hooks or eyes.
•
Acid paper.
•
Any any other unapproved media.
Main and additional paper tray
Manual feeder
Capacity
Up to 500 sheets depending on the
weight used.
Up to 100 sheets depending on the
weight used.
Orientation
Print side facing down
Print side facing up
Driver
Standard / recycled paper
Weight
60 to 90 g/m² (16 to 26 lb)
Duplex
See section Which paper formats can be used? [
146].
Note
Store media in a room where relative humi-
dity is between 35% and 85%. Toner does
not adhere to damp surfaces.
