60
7.8 System Check
The information contained in this menu may be requested if you contact your supplier or another technical
service.
You will find here information about the receiver and the embedded software, smartcard information and a
system diagnostic utility.
To return to the previous screen and save your changes, use the
ZURÜCK
or the
left
key.
To exit the menu screen, press the
MENÜ
or
EXIT
key.
7.8.1 Device
Information
This menu provides information on the receiver, the embedded software and last updates, as well as the
remaining capacity of the receiver’s hard disk.
1.
Press the
MENÜ
key.
2.
Select SETTINGS with or , and press
OK
.
3.
Select SYSTEM CHECK with or , and press
OK
or the
right
key.
4.
Select DEVICE INFO with or .
7.8.2 Smartcard
Information
This menu provides information on your smartcard. Make sure the smartcard is inserted into the receiver
to retrieve and display this information.
1.
Press the
MENÜ
key.
2.
Select SETTINGS with or , and press
OK
.
3.
Select SYSTEM CHECK with or , and press
OK
or the
right
key.
4.
Select SMARTCARD with or .
7.8.3 TV
Signal
This menu provides information on the cable network, and lets you find out the signal level on different
channel frequencies.
1.
Press the
MENÜ
key.
2.
Select SETTINGS with or , and press
OK
.
3.
Select SYSTEM CHECK with or , and press
OK
or the
right
key.
4.
Select TV SIGNAL with or .
The following Network information is displayed:
•
Last Network Scan
: date of the last scan
•
TV/Radio Channels
: number of TV and Radio channels installed
•
Signal level
: shows, for each tuner, the signal quality of the current channel
•
BER
: shows, for each tuner, the Bit Error Rate of the current channel
•
Network info
: cable network name
Summary of Contents for RCI88-1000
