80
10.Troubleshooting
Symptom
Action
The remote control is not working.
•
Press the
EXIT
key to switch to receiver mode.
•
Point the remote control at the receiver.
•
Check the battery life and check the batteries are inserted
properly.
The receiver displays a black screen or an
error message.
•
Search for programs (see
The picture is frozen / unclear.
•
Check all the connections, check the antenna and search
for programs again (see
The receiver cannot find any channels.
•
Check the cable connection.
•
Check the cable signal reception (see
).
•
Search for programs (see
•
Contact your cable installer/operator for more information
on your cable installation and reception.
The TV set does not detect the receiver
when it leaves standby mode.
•
Check that your TV set is connected to the TV SCART
socket (see
Connection to a Standard-Definition
•
If necessary, select the SCART input directly on your TV
set.
There is no sound in HOME CINEMA
mode on some channels.
•
Check that the receiver is connected to a HOME CINEMA
amplifier through the optical SPDIF connection (see
Connection to a home cinema amplifier
).
Black and white video on VCR output
(during VCR/DVD recording).
•
Check that the signal type chosen for VCR Scart output is
compatible with your VCR (see
A black screen (no video) appears at the
end of a recording.
•
When a recording ends on a program which does not
transmit any interpretable recording video signal (Teletext
feature, fixed image, switch from unscrambled to
scrambled transmission, broadcast with video placeholder,
etc.), the video recording stops but the time counter
continues until the end of the scheduled recording time.
For any other problem.
•
Perform a default factory reset (see
Summary of Contents for RCI88-320
