19
Configuration with the Web browser
SE681 WiMAX / engbt / SE681_FUG_EN_9 / Basic_configuration.fm / 18.5.11
Schablo
ne 201
1_04
_07
Configuration with the Web browser
You do not need to install any software on your PC to configure your SE681 WiMAX;
the configuration program is stored on the device. Open this software in the same way
as an Internet page in the Web browser and make the required settings. Your settings
are then stored directly on the device.
On startup, the Basic Setup Wizard helps you set up a connection to the WiMAX net-
work and configure your Internet access.
Presentation of the configuration program
To configure your SE681 WiMAX, we recommend the Microsoft Internet Explorer ver-
sion 7.0 or Mozilla Firefox version 2.0 or their higher versions. However, you can also
use most other or older Web browsers.
Launching the user interface
Open your Web browser.
Enter the IP address of your SE681 WiMAX in the address field of your Web
browser:
http://192.168.2.1
Press Enter (Return).
If a system password has been set up on your SE681 WiMAX, the login screen will now
open.
Enter the system password supplied by your provider in the text box and click
Ok
.
The start page (Home) of the user interface opens, in which you can change the lan-
guage if necessary (
Change the system password later to one of your own (see "System password" on
page 39).
If no system password has been set up on your SE681 WiMAX, a security warning will
appear first. You should then assign a system password as soon as possible.
Confirm the security warning with
Ok
.
i
For experienced users:
– IP address: 192.168.2.1
– Subnet mask: 255.255.255.0
i
Number and amount of the functions and settings provided by the confi-
guration program may differ specific to a project.
User interface
