ENGLISH
30/31
When work has been completed, both the gland and the product cup must be cleaned with the appropriate
thinner,
in order to remove any remaining product.
Empty the product cup and pour in the thinner, fit and close the cup cover.
Operate the mechanisms and spray the thinner until the application is clean. Repeat the operation as many
times as may be necessary.
Remove any remains of product from the gun and cup with a cloth soaked in thinner.
Keep air gasket areas free of accretions and foreign bodies.
The air nozzle is a precision component. Any deformation, especially in the air outlet orifices, may cause
malfunctions in its operation and incorrect or deficient quality spraying.
If necessary,
dip the air nozzle in thinner
in order to soften the remains of product or dirt. Once softened,
blow the nozzle with compressed air
until any remains of product and thinner are eliminated.
Should it be necessary to remove the air nozzle,
do this with an appropriate,
soft object, with great care and
avoiding any marking or scratching.
Release the elastic ring
that holds its components together.
Once disassembled,
clean with thinner, using the cleaning brush
supplied
. Do not use any hard or metallic
object.
The blocked orifices of the nozzle must not be cleaned with a sharp or hard object under any
circumstances.
Assemble the nozzle.
For automatic cleaning o
f the gun, tools and accessories used in the mixing and preparation of the product
to be applied,
we recommend the use of SAGOLA washing machines.
IMPORTANT
The gun can be cleaned
with thinners or detergents
in a gun washing machine.
If you opt for this cleaning system,
we advise you to
remember the following considerations,
which, if not applied, may damage the gun and render the warranty null and void.
- Do not submerge the gun in solvent or detergents longer than the time required for cleaning.
- Do not use the gun immediately after cleaning has been completed.
- Ensure that there is no thinner or detergent inside
and that it is completely free of these
substances.
Other cleaning systems
can be used (ultrasound).
- Do not open the sight glass of the digital pressure gauge.
- If you open the housing of the digital pressure gauge battery, fit a new gasket.
- Do not clean the digital pressure gauge sight glass with sharp, pointed or rough objects.
15. Lubrication
The original lubrication of the gun is eliminated through use and cleaning. In order to guarantee
perfect operation,
it is necessary to grease the regulating or fastening threads, friction areas, etc.
on a periodic basis, especially after each cleaning session and with greater care if the gun has
been cleaned in a machine.
Moving parts must be lubricated lightly after cleaning has been completed.
We recommend you to use a light SAE 10 oil or natural grease or vasoline.
Summary of Contents for 4500xtreme
